CAHORS Digital TVS 8100 User Manual page 13

User Manual
NIT: If NIT is ON, and the TP include the NIT information, then it will extend to search the new
Frequency which contained in NIT table. It's very useful when Search Mode is 'Default TP' or
'One TP'.
Programme: There are All, TV, Radio, SD, HD and Free Only for your option, you can select
it based on your requirement. Default Value is All.
Search Mode: There are Default TP, One TP and Blind Scan for option, you can select it
based on your requirement. Default Value is Default TP. If the TP list is correct, it is better to
set it to Default TP, if you want to search TP without the existedTP list, you can set it to Blind
Scan.
Search Type: There are Single Satellite and All Satellite for your option, default value is
Single Satellite, if you have connected to multi satellites and want to search it at one time, you
can set it to All Satellite.
There is a table to show the signal Strength and Quality of current TP of current satellite with
current parameters.
(GREEN):Press this button to begin searching.
During the searching, you can press (EXIT)to cancel it and back to Auto Scan menu or
(MENU)to playing channel status.
The searching will use the searched new channel database to replace the old one, please
kindly mind it, if you want to save the old database before searching, please backup your old
channel database to USB disk or Flash in this unit, more details please refer to the chapter of
'Back to USB' or 'Backup Channel'.
4.Manual Scan
In this menu, you can search the existed TP or a new TP quickly.
Satellite: It will list the satellites which chosen in 'Satellite Setting' menu.
Frequency:It will show the current channel's frequency, if you want to search a new TP, just
press (0~9)number key to input the new frequency.
Symbol Rate:It will show the current channel's symbol rate, if you want to search a new TP,
just press (0~9)number key to input the new symbol rate.
Polarization:Horizontal or Vertical
NIT: If NIT is set to ON, and the TP includes the NIT information, then it will extend to search
the new Frequency which contained in NIT table.
Programme: There are All, TV, Radio, SD, HD and Free Only for your option, you can select
it based on your requirement. Default Value is All.
There is a table to show the signal Strength and Quality of current TP of current satellite with
current parameters.(GREEN):Press this button to begin searching.
~ 11 ~