Table of Contents
Advertisement
User Manual
A. Installation
1.Dish Setting
In this menu, you can set detailed
parameters for selected satellites, such as
LNB Type, DiSEqC, 22K, Motor and so on.
Satellite: It will list the satellites which
chosen in 'Satellite Setting' menu.
LNB:It should be match the type value of
LNB you used, support 5150, 5170, 9750,
10600, 10750, 11300, 11475, 5150/5750,
Universal(9750/10600), Universal F(9750/10750) and USER LNB which allow you to define it
by yourself.
Transponder:It will list the existed TP list and try to lock the signal with the current
parameters.
DiSEqC 1.0:If you are using DiSEqC 1.0 switcher, you should set it to match your DiSEqC
switcher. There are None, 1/4, 2/4, 3/4, 4/4, ToneburstA and ToneburstB for your option.
DiSEqC 1.1:If you are using DiSEqC 1.1 switcher, you should set it to match your DiSEqC
switcher. There are None, 1/16, 2/16, 16/16 for option.
22K Tone:If you are using 22K switcher, you should set it to match your 22K switcher. There
are ON, Off and None for option when the LNB type is not the Universal type, while 22K Tone
will be Auto when LNB type is set to Universal.
Polarization:Horizontal or Vertical.
Motor:It support DiSEqC1.2 and USALS motor both.
Unicable:This function is used for some customer, especially in Turkey.
There is a table to show the signal Strength and Quality of current TP of current satellite with
current parameters.
(RED): Press this button to jump to 'TP Manager' menu directly.
(GREEN):Press this button to jump to 'Auto Scan' menu directly.
2.Motor Setting
3.Auto Scan
In this menu, you can set detailed parameters for scanning, such as Satellite, NIT, Search
Mode and so on.
Satellite: It will list the satellites which chosen in 'Satellite Setting' menu.
Transponder: It will list the existed TP list and try to lock the signal with the currently
parameters. The result of lock will show in the table of Strength and Quality.
~ 10 ~
Hide quick links:
Advertisement
Table of Contents
