Philips 29PT4973 Instructions For Use Manual page 6

6
6
The TV's controls
3
1
1. Mains power
2. Red light indicator
3. Remote control sensor
4. Headphone socket
5. Volume adjustment
6. Channel selection
4
3
n
2
Switch on or off the TV.
When light is on, it indicates that the TV is on
standby. Note :If no signal is detected by the
TV after 10 minutes, it will switch to standby
automatically.
For the remote control to work, it must be
activated within the operating range of this
sensor.
For connection of headphones.
To adjust volume level. Press these 2 keys
simultaneously will call up the 1st level
menu. Press these 2 keys again will exit
menu. Works as cursor left (VOLUME L) or
right (VOLUME K) in a menu.
To select a lower or higher channel number.
Works as cursor up (CHANNEL 6) or down
(CHANNEL 7) in a menu.
5
˝ ˙ ¸ ˚
L K ¸
VOLUME CHANNEL˚
6