Table of Contents
Advertisement
Follow these procedures to maintain the product.
Clean the mattress this way.
WARNING!
1. Prepare a water bottle (about half gallon/
1.5liter) to pour into the water tank.
2. Plug the Water Removal Kit, which
comes along when purchasing the
product, into two entries on hosepipe in
the mattress, and plug a pump to one of
two connectors to extrude water.
For Queen type, connect the Water Removal
Kit to two of three connectors in both sides of
the connector
Store the mattress this way.
1. Fold the mat with 3 divisions as
shown below.
2. Fold the mat further as shown below.
There is a risk of scalding when attempting to drain water from the
mattress. Ensure that the water is cool enough before draining.
Mattress should be hand washed only
and a mild detergent should be used.
Remove the cover and lightly clean,
then air dry.
3. Use the included storage
accessories to properly store
the product.
25
Hide quick links:
Advertisement
Table of Contents
