Table of Contents
Advertisement
shutdown 0 su
6.
You will see a message:
Type control-d to proceed with normal startup
(or give root password for system maintenance):
Type in your root password if you have one, if not press <Enter>.
7.
You will see a message:
TERM=(ansi)
press <Enter>
8.
Insert GTS V2.2.0 Yr 2000 Enhancement Disk 1 of 2 into the boot drive.
At the # prompt type:
custom
9.
Select 4. Add a supported product and press <Enter>
10.
At the prompt "Insert distribution volume 1 and press <RETURN> or enter q to quit:
press <Enter>
Note
At this point the disk should be accessed. If you have two floppy drives and the
other drive's light has turned on and errors are reported, type q until you are back
at the # prompt,
Return to step (8) but type the following instead of "custom" custom -m /dev/
fd1135ds18 (If you want to use the 3.5" floppy drive that is not the boot drive.)
11.
If no errors occur, select 1. Install one or more packages and press <Enter>
12.
Type
ALL
press <Enter>
13.
You will then see a message:
Insert XNX427- Year 2000 SLS for SCO Xenix Volume 1 and press <RETURN> or
enter q to quit:
press <Enter>
14.
When you see the message:
Do you wish to archive the update files? (y/n)
Type
n
press <Enter>
15.
At the message:
Installation complete, select an option or enter q to quit
Type
GDC 036R903-22011
Loading Instructions
3
Advertisement
Table of Contents
