INTRODUCTION Taking this opportunity, we express our heartful thanks to clients who purchased our products. Whole member of our Company, with a pride of long history and tradition, are paying hardest efforts to turn out products which can go with consumers' taste under continuos R & D and Q.C based on long-accumulated know-how.
SAFETY INTRODUCTION The following safety instructions have been included in compliance with safety standard regulations. 1. Read Instructions All the safety and operation instructions should be read before the appliance is operated. 2. Retain instructions The safety and operating instructions should be retained for future reference. 3.
SAFETY INTRODUCTION 11. Grounding or Polarization Precautions should be taken so that the grounding or polarization means of appliance is not defeated. Mounting in a Rack If multiple high-power amp units are mounted in a rack with pour ventilation, the heat from the amps will cause the interior of the amp to became very hat, causing the performance of the amps to be impaired.
FEATURES PANEL CONTROL 1. INPUT VOLUME CONTROL The two input attenuator controls (located at the front panel) adjust gain for their respective amplifier channels in all modes. The main amplifiers have input sensitivities of 1.25Volts(+4dBm) and have output voltage gains as follows. : 300Watts = 34.6Volts / 450Watts = 42.4Volts / 600Watts = 48.9Volts The Mono Bridge &...
SPEAKER CONNECTIONS Connect the left-side loudspeaker to the left-channel speaker terminals and the right side loudspeaker to the right-channel speaker terminals of this unit, take care to observe correct(+) and (-) polarity. If the polarity of one speaker is reversed, the speakers will be out of phase, causing a loss in bass response and unstable, irregular stereo imaging.