Advertisement
Instrument
Panel
4
3
Information Display
2
Service Engine Soon Light
7
Wiper Controls*
5
Media Controls*
6
Voice Controls*
1
Cruise Control
4
Tilt and Telescope Steering Column
1 Cruise Control
To Set Your Cruise Control Speed
A. Press and release ON.
B. Drive to the desired speed.
C. Press and release SET +, then take your foot
off the accelerator.
After you set a speed, you can press SET + or
SET – to adjust cruise speed. To cancel the set
speed, pull the CAN (Cancel) control toward
you or tap the brake pedal.
2 Service Engine Soon Light
Lights briefly when you switch on the
ignition. If it remains on or is flashing after you
start the engine, the On-Board Diagnostics
(OBD-II) system has detected a problem.
Drive in a moderate fashion and contact your
authorized dealer as soon as possible.
3 Information Display
Provides information about various systems on
8
Push Button Start*
your vehicle. Use the left, 5-way controls located
on the steering wheel to choose and confirm
settings and messages. Refer to the Information
Displays chapter of your Owner's Manual for
more information.
4 Tilt and Telescope Steering Column
Unlock the steering wheel by pulling the lever
down. Adjust the wheel to the desired position
(in, out, up and down). Push the lever back up
9
Auto-Start-Stop*
to lock the steering wheel in place.
5 Media Controls*
Press VOL + to increase or VOL - to decrease
volume levels.
Press |⊳⊳ ⊲⊲| to hear the next or previous saved
radio station, CD or MP3 track.
Press and hold to seek up or down the
frequency band, or through CD and MP3 tracks.
6 Voice Controls*
Press to access voice recognition.
Press the phone button to answer an
incoming call.
Press and hold to exit phone mode or
end a call.
7 Wiper Controls
Use the rotary control on the lever to
adjust the wipe intervals. Pull the lever
toward you to wash the windshield.
8 Push Button Start*
Allows you to start your vehicle by pressing the
START STOP button when fully pressing down
on the brake pedal. Press the button again to
switch off the engine.
Note: Your intelligent access transmitter* must
be inside the vehicle to start the ignition.
9 Auto-Start-Stop*
For more information about Auto-Start-Stop,
please see page 18.
5
*if equipped
Advertisement
