Attach Propellers; Charge Battery - 3D Robotics RTF-Y6 Manual

2

Attach propellers

Remove the rings from the propeller
packages. Select the ring with the
smaller internal diameter, and insert
it into the back of the propeller hub.
Remove the nuts and washers from the
motors. Add SFP propellers to top
motors and SF propellers to bottom
motors with the writing on the
propellers facing towards the sky.
Place the washer over the propeller, and
secure the nut tightly on top. Always
ensure that the propellers are fastened
tightly to the motors before flying.
3

Charge battery

Connect the charger to the power
adapter cable and a wall outlet.
Connect the red cable to the + port
and the black cable to the - port.
Set the charger to LiPo and 3A.
SFP
SF
SFP
SF
LiPo 3A
SFP
SF
+
red
–
black