Table of Contents
Advertisement
Configuration examples Address assignment by DHCP -Recommended configuration - (Default setting)
you are relatively new to Windows network configuration, we recommend a configuration using DHCP.
Things to note for this configuration.
PABX:
You can de-activate the DHCP server for the PABX system using the »Professional Configurator« program.
Note
You may have to adapt the IP addresses and subnetworks of the PABX system to the settings present on the LAN
clients (PCs). For information about this use the online Help function of the Configurator.
LAN-Client (PC) Configuration
You must make the following minimum settings manually:
·
IP address for the LAN client (PC)
·
Netmask / Subnet mask (which is also entered in the PABX router)
·
IP address of the PABX system as the gateway (interface to other networks, for example Internet)
·
IP address of the PABX system as the DNS server (server that converts the Internet addresses into IP ad-
dresses)
Note
Observe the instructions for address assignment given on the previous pages.
PC settings in Windows operating system
The procedures described below deal only with examples which may differ somewhat depending on the operating
system used and the configuration of the PC.
12
1
S0 intern
S0 extern
1a/b
2a/b
3a/b 4a/b
Modul
S0 intern
a/b1
a/b1
a/b2
a/b3
a/b4
a/b5
a/b6
a/b7
a/b8
NO
NO
1a/b
2a/b
3a/b
4a/b
5a/b
6a/b
a2 a1 b1 b2
4
Modem
5
9
8
7
1
NT
2
2
NT / Splitter
3
Connection for the service provider
4
Modem
3
5
External HUB / Switch by means of LAN2
(100 MBit/s)
6
Network PC 4 at HUB / Switch
7
Network PC3 at the HUB / Switch
8
Network PC2 at the HUB / Switch
9
PC 1 at USB port
6
Advertisement
Table of Contents
