Panasonic SA-PT470EB Service Manual page 80

Step 19 Position Main P.C.B. according to the diagram shown.
Step 20 Turn the Front Panel and position it according to dia-
gram shown.
Step 21 Connect 14P cable at the connector (CN6003) on Main
P.C.B.
Step 22 Connect 7P cable at the connector (CN2010) on Main
P.C.B.
Step 23 Connect 19P cable at the connector (CN2007) on Main
P.C.B.
Step 24 Attach original cable with extension cable REXX0653-
J (14P cable from H2901 to CN2016).
Step 25 Attach original cable with extension cable REXX0724
(8P cable from H2900 to CN2017).
Step 26 Attach original cable with extension cable REXX0725
(8P cable from H5801 to CN5500).
Step 27 Process to check and service side A of DVD Module
P.C.B.
• Checking & Servicing side B of DVD Module P.C.B.
Step 28 Remove 2 screws on DVD Module P.C.B.
Step 29 Twist the wire clamper to remove 3P cable at the con-
nector (CN5501).
Step 30 Remove 1 screws at the rear panel.
Step 31 Remove 6 screws at the rear panel.
Step 32 Release the catches and remove the fan unit.
Step 33 Release the tabs of rear panel to remove rear panel.
80