Audiovox Thero User Manual page 59

Chapter 3: Phone Functions
Keypad Operation List
Regardless of the program in use, pressing the SEND button or the END button while Watcher is
open displays the VOICE tab of the Watcher screen.
Even if the power is turned off, pressing the SEND button turns the power on and displays the
VOICE tab screen. (However, the setting can be changed not to turn the power on.)
When the Watcher screen is displayed, the SEND/END buttons on the device perform the same
functions as the SEND/END buttons on the screen. Button functions include:
Idle
SEND Calls phone number displayed on
screen. If a phone number is not
displayed, last number dialed is
called.
END Delete all entered numbers at
once.
CLR Delete entered numbers one by
one or tap and hold CLR button
to delete them all at one time.
0-9, Enter the number you wish to
, # call. Tap and hold the Speed Dial
*
location number for one-touch
dialing of that number.
Navigation Button and Program
When in the Watcher screen, pressing the navigation button on the device opens the following
programs:
Speed Dial
Phone Book
Call Log
Messaging
Incoming Call During a Voice Call
Answer a call. Answers incoming call; switches to
Three-Way calling.
Reject the incoming End all calls including the three-way
call. calling.
Mute the ringer Delete messages or entered numbers
tone. one by one. Tap and hold the CLR
button to delete them all at one time.
If Any-key Answer is Number entered is displayed on
set, you can answer screen.
a call by tapping any
of these keys.
Top : Phone Book
Bottom : Messaging
Right : Call Log
Left : Speed Dial
59