LG LGD521 User Manual page 10

2ch front full hd / rear hd high resolution/ front 30fps / rear 30fps/ format free recording/ low battery and high temperature shutdown/ security led & audio prompts/ wirelessconnectivity
Table of Contents

Advertisement

8
Recording Scenario
Driving Mode
① Recording of an impact event in the driving mode
 A buffer video of 10 seconds will be included in the video when an impact event occurs in the driving mode.
 If the power supply is cut off immediately after an impact event while driving, the event recording at the end may
not be performed normally. In this case, you can refer to the normal recording of the same timeline.
② Recording of multiple impact events in the driving mode
 If another event occurs during impact event recording, the second event can be processed 10 seconds after
occurrence of the first impact event.
 After the first impact event file is saved, the second one is saved.
 If the second impact event happens after or at the same time with the completion of the first impact event, the
recording of the second impact event will start 10 seconds before the completion of the first impact event.
 Once an event happens and a new file is created, the second event will not be recognized for 10 seconds after
occurrence of the first event.
Parking Mode
This refers to the recording while the vehicle is parked with ACC off.
Motion event is not recognized within 10 seconds after switching to the parking mode. The product can sense a
motion 10 seconds later.
① Recording of an impact event in the parking mode
 A buffer video of 10 seconds will be included in the video when an impact event occurs in the parking mode.
② Recording of multiple impact events in the parking mode
 If another event occurs during impact event recording, the second event can be processed 10 seconds after
occurrence of the first impact event. After the first impact event file is saved, the second one is saved.
 If the second impact event happens after or at the same time with the completion of the first impact event,
the recording of the second impact event will start 10 seconds before the completion of the first impact event.
 Once an event happens and a new file is created, the second event will not be recognized for 10 seconds after
occurrence of the first event.
③ Recording of a motion event in the parking mode
 A buffer video of 10 seconds will be included in the video when a motion event occurs in the parking mode.
④ Recording of multiple motion events in the parking mode
 If another motion event occurs during motion event recording, the second event can be processed 10 seconds
after occurrence of the first motion event. After the first motion event file is saved, the second one is saved.
 If the second motion event happens after or at the same time with the completion of the first motion event,
the recording of the second motion event will start 10 seconds before the completion of the first motion
event.
⑤ Recording overlap of a motion event and an impact event in the parking mode
 If an impact event occurs together with a motion event, recording of both events will overlap during the
parking mode.
 A buffer video of 10 seconds will be included in the impact event video when an impact event occurs during
motion recording. (This is the same even when a motion event occurs during impact recording.)
 If another event occurs during the overlap of an impact event and a motion event, the product follows the
scenario for recording of multiple events for the corresponding event type.
Switching the Mode
① Driving mode > Parking mode
 Automatic switching: If ACC is cut off in the normal recording mode, the product enters the parking mode
10 seconds later.
② Parking mode > Driving mode
 Automatic switching: If ACC power is high, the product automatically switches to the driving mode.
Channel Switching Scenario
9
Scenario for Switching between 1-Channel and 2-Channel
Automatic Recording
 If the rear camera is removed when the product is set to 2 channels, the 2-channel recording
continues and the rear screen shows black frames.
 The rear connection alarm sounds once and repeats every 10 seconds. This can be stopped by
changing the rear connection or the channel settings.
 At this time, the recording may be stopped for 1 - 3 seconds.
Non LCD FHD-HD DASHCAM
1 0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents