Table of Contents
Advertisement
4.7 Boot Screen
In this section, it will display the available devices on your system for you to config-
ure the boot settings and the boot priority.
Fast Boot
Fast Boot minimizes your computer's boot time. There are three con-
figuration options: [Disabled], [Fast] and [Ultra Fast]. The default value is
[Disabled]. Please refer to below descriptions for the details of these three
options:
[Disabled] - Disable Fast Boot.
[Fast] - The only restriction is you may not boot by using an USB flash
drive.
[Ultra Fast] - There are a few restrictions.
Setup Prompt Timeout
This shows the number of seconds to wait for setup activation key.
Bootup Num-Lock
If this item is set to [On], it will automatically activate the Numeric Lock
function after boot-up.
Full Screen Logo
Use this item to enable or disable OEM Logo. The default value is [Enabled].
AddOn ROM Display
[Force BIOS] - The third-party ROM messages will be forced to display
during the bootsequence.
[Keep Current] - The third-party ROM messages will be displayed only if
the third-partymanufacturer had set the add-on device to do so.
46
1. Only supports Windows
2. You will not be able to enter BIOS Setup (Clear CMOS or run utility
®
in Widows
to enter BIOS Setup).
3. If you are using an external graphics card, the VBIOS must support
UEFI GOP in order to boot.
®
8.1 UEFI operating system.
Hide quick links:
Advertisement
Table of Contents
