Component List; Technical Specifications - GardenMaster GMPLMCNC Safety And Operating Manual

COMPONENT LIST

1. Foam grip handle
2. Throttle lever
3. Upper handle
4. Lock cam lever
5. Lower handle
6. Cable clip
7. 4-Stroke engine (engine cover)
8. Air filter cover
9. Spark plug cap
10. Steel deck
11. Muffler cover
12. Oil tank cap
13. Pull starter handle
14. Cutting height adjustment lever
15. Fuel tank
16. Fastening nut for lower handle
17. Fuel tank cap
18. Safety flap
19. Grass catcher
20. Pull starter hook
21. Socket spanner for spark plug
22. Spanner
23. Oil drain plug (See Fig. M)
Not all the accessories illustrated or described
are included in standard delivery.
ACCESSORIES
Grass catcher
Spanner
Socket spanner for spark plug
Cable clips
We recommend that you purchase your accessories
from the same store that sold you the tool. Use good
quality accessories marked with a well-known brand
name. Choose the type according to the work you intend
to undertake. Refer to the accessory packaging for
further details. Store personnel can assist you and offer
advice.

TECHNICAL SPECIFICATIONS

Engine power:
Engine displacement:
Max cutting dia:
Cutting height range:
Engine:
Wheels size:
Collection capacity:
Weight:
4HP
139cc
Ø46cm
19-70mm
4-stroke engine
150mm/front & 175mm/rear
47L
28kg
ASSEMBLY
WARNING! Lift your lawnmower from the
carton required two people. Make sure that
you have sufficient space to put the lawn mower
down. Keep your feet apart so that you have a
stable position, bend at the knees and keep your
back straight.
1. ASSEMBLY OF THE HANDLE (SEE FIG. A-B)
1) Remove the packaging from the handle.
2) Fit the lower handle (5) to the steel deck as shown in
Fig. A. Tighten it with the screws and nuts (16) included
in carton box. The nuts must be fitted outside of the
deck (See Fig. B).
Fig.A
Fig.B
1
1
1
2
2. ASSEMBLING THE GRASS CATCHER (SEE FIG. C1-C3)
1) Assemble the handle of the catcher according to the
process shown in Fig. C1.
2) Assemble the two halves of grass catcher (19). Snap
together the top and bottom grass catcher halves by
pushing all the "snap fits" together around the edges,
start from the rear and work towards the front.
Fig.C1
5