Advertisement
INSTALLATION
UNPACKING THE APPLIANCE
Remove the external & internal packaging.
When unpacking the appliance please check for any damage. If damage is found, do not connect to the power
source and contact the Authorised Service Provider. Check that the following items are contained within the
packaging:
1 Storage Basket
1 Instruction Manual
Before connecting the freezer to the power source, let it stand upright for approximately 4 hours. This will reduce the
possibility of a malfunction in the cooling system from handling during transportation. Remove any protective film
from the outer surface.
Clean the interior surface with lukewarm water using a soft cloth.
INSTALLING THE FREEZER
This appliance is designed to be free standing only, and should not be recessed or built-in.
Place your freezer on a level floor that is strong enough to support the freezer when it is fully loaded.
Allow at least 10 cm of space between the back and sides of the freezer, which allows the proper air circulation,
and at least 70cm above the unit.
Locate the freezer away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may
affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient
temperatures may also cause the freezer not to perform properly. Avoid locating the freezer in moist areas.
Plug the freezer into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or
remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should
be directed toward a certified electrician or an Authorised Service Centre.
After plugging the appliance into a wall outlet, allow the unit to cool down for 2~3 hours before placing food in
the freezer compartment.
APPLIANCE DETAILS
ELECTRICAL DETAILS:
Rated Voltage:
Supply Connection:
Max Rated Inputs:
This information can be found on the rating plate
(data label) affixed to the rear of the appliance
OCF380:
Dimensions (WxDxH): 1300x700x845mm
Weight: 50kg
OCF316:
Dimensions (WxDxH): 1120x700x845mm
Weight: 44kg
1. Internal handle.
2. Drainage hole.
3. Storage basket.
4. Power cord (not shown).
5. Control panel.
6. Castors (2 fixed, 2 uni-directional).
4
220-240 Vac 50 Hz.
10 A domestic socket.
See data label on unit.
4
3
Advertisement
