Advertisement
Peavey
6505
®
Thank you for purchasing the powered 6505® SUB. The 6505® SUB is an add-on guitar subwoofer, designed to add a solid foundation
of deep musical tones to any guitar rig. The 6505® SUB is the perfect solution for any guitarist using extended range guitars such
as 7 and 8 string guitars. The 6505® SUB features a power section that provides 600 watts peak available power for the woofer with
Peavey's famous DDT™ compression feature. Featuring a 18" heavy duty woofer, the 6505® SUB provides a 1/4" phone jack speaker
level input, as well as a balanced XLR input jack, balanced XLR output with switchable thru/high pass filter and level control. In the
event of ground-loop hum between connected equipment, the 6505® SUB also features a ground-lift switch.
Features
• 600 W total peak available power
• DDT™ compression
• Crossover frequency 120 Hz
• Bass contour circuit
• 4th order Linkwitz-Riley crossover
• 18" heavy duty woofer
• Woofer servo for reduced woofer distortion
• Peak SPL up to 119 dB with music
• One 1/4" phone jack for speaker level input capability
• Female XLR line-level balanced input
• Male XLR thru, switchable either High-pass or thru
• Black Tolex style covering, white piping 6505 trademark grille trim
Description
The Peavey 6505® SUB is a powered low frequency speaker system engineered to provide very high levels of performance in a
compact loudspeaker. The 6505® SUB is capable of up to 119 dB peak SPL. The enclosure is made from 3/4" MDF, covered in black
Tolex-style covering, with a fabric style wooden frame grille with the same styling as the other 6505 series components, to offer an
attractive yet durable powered speaker system.
Input is via a 1/4" phone jack for speaker level signals, or use a balanced input to the preamp/EQ electronics consisting of one male
XLR jack. A woofer servo senses back-EMF from the woofer voice coil that is not a result of the drive signal, and subtracts the error
so that the woofer cone follows the drive waveform precisely. Constant Loudness (Fletcher-Munson) circuit for accentuating bass
at low listening volume levels. Two switch-mode power amplifier provides 150 watts continuous RMS each into the nominal 8 ohm
load of each voice coil of the dual voice-coil woofer, yielding 300 watts RMS total. Both amplifiers feature our famous DDT™ power
amplifier compression, which virtually eliminates audible power amplifier clipping.
Metal handles provide ease of transport, while the top located caster pockets make stacking a combo guitar unit a breeze.
Applications
The Peavey 6505® SUB has a variety of applications for bass augmentation of guitars, and other electric stringed instruments.
VENTILATION: For proper ventilation, allow 24" clearance from the nearest combustible surface.
All vents should have a minimum of 2" of free air space so air can flow thru the unit freely for proper cooling.
ENGLISH
Sub
®
Advertisement
