Sound Adjustment - JVC KW-V520BT Instruction Manual

SETTINGS SETTINGS

Sound adjustment

❏ Using the sound equalization
• The adjustments are memorized for each source
until you adjust the sound again. If the source is
a disc, the adjustments are stored for each of the
following categories.
– DVD/VCD
– CD
– DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC
• You cannot adjust the sound when the unit is in
standby.
Selecting a preset sound mode
1
Display the <Equalizer> screen.
On the Home screen:
2
Select a sound mode.
• You can change the page to display more
items by pressing [ ]/[
• You can also display the <Equalizer> screen by
pressing [ ] on the source control screen.
44
Storing your own adjustments—Adjusting the
sound precisely
1
Select a sound mode. (See the left column.)
2
Select a band and adjust the level of the
selected band.
• You can adjust the level by dragging the slider
or using [J]/[K].
• Repeat this step to adjust the level of other
bands.
The adjustments are stored and <User> is
activated.
3
Adjust the sound.
<Q factor>
<Bass EXT>
].
<SW LEVEL> Adjusts subwoofer level.*
Adjusts the width of the
frequency.
Activates ([ON])/deactivates
([OFF]) bass.
• To apply the adjusted equalizer to all playback
sources, press [ALL SRC], then press [OK] to
confirm.
• To clear the adjustment, press [EQ INT].
* Not adjustable when <None> is selected for subwoofer on the
<Speaker Select> screen. (Page 45)
❏ Setting the crossover network mode
Select the appropriate crossover network mode
according to the speaker system (2-way speaker
system or 3-way speaker system).
1
Turn off the AV source. (Page 9)
2
Display the <X'over Network> screen.
• For KW-V420BT/KW-V420BTM/KW-V220BT /
KW-V220BTM/KW-V120M/KW-V520BT/
KW-V520BTM: Press FNC and volume + on the
monitor panel at the same time.
• For KW-V320BT/KW-V320BTM: Press
volume + on the monitor panel at the same
time.
3
Select the crossover network mode.
•
[2 way] Select this when connecting speakers
in a 2-way system (front/rear).
[3 way] Select this when connecting speakers
in a 3-way system (tweeter/mid
range/woofer).
A confirmation message appears. Press [Yes].
and