MIXVIBES U-Mix DJ Set User Manual page 14

4 Player and Mixer
3 Effect Volume : adjust the effect volume.
4 Displays the current selected effect. Use your left-hand mouse button on this
option to view the drop down list of effects.
5 Effect parameters: This allows you control over the current effect. The adjust-
ment will depend on the effect selected.
6 Effect beat.
7 Displays the current preset. Use your left-hand mouse button on this option
to view the drop down list of presets.
8 Edit effects: Open the effects windows to edit the effects parameters more
precisely.
9 In - Loop entry point: This defines the entry location of a manual loop.
10 Out - Loop end point: This defines the end location of a manual loop. By
pushing this button again you will quit the loop. Note: Activate 'Smart loop'
(Preferences menu) if you want to set the loop in/out points exactly on the closer
beat.
11 Reloop: By pushing this button you will return to the last set loop.
12 Cue/Stop: This allows you to define a cue point and stop the playback of a
media file (when the media file stops playing it will return to the defined cue
point).
13 Play/Pause: Allows to launch the playback or pause the playback of a media
file.
14 Rewind/Fast Forward: Depends on the selected beat value.
15 Previous/Next media: This loads the previous/next file displayed in the Media-
Base.
16 Reverse the media playback.
17 Autoloop/Beatloop: This creates beat matching loops depending on the se-
lected beat. When in Auto loop mode this will flash. Deactivate the beat loop via
the Play/Pause button.
18 Beat: This selects the desired bar.
C
M
J
CM
MJ
CJ
CMJ
N
14 /
36
vibe-watermark-brig vibe-watermark-brig