Safety Notices; User Responsibilities; General Safety Notices - mensor CPG2500 Operating Instructions Manual

2

Safety Notices

2.1

User Responsibilities

To ensure safety, the user must make sure that:
• The system is used properly, no dangerous media are used and that all technical specifications are
observed.
• The system is operated in perfect operating condition.
• This operation manual is legible and accessible to the user at the system's location.
• The system is operated, serviced and repaired only by authorized and qualified personnel.
• The operator receives instruction on industrial safety and environmental protection, and is knowledge-
able of the operating instructions and the safety notices contained therein.
2.2

General Safety Notices

i
The system should only be operated by trained personnel who are familiar with
this manual and the operation of the instrument.
Notice
WARNING: A condition for trouble-free and safe operation of this system is proper
transport, proper storage, installation, assembly and proper use as well as careful
!
operation and maintenance.
Any operation not described in the following instructions should be prohibited.
The system must be handled with care required for an electronic precision instru-
Warning
ment (protect from humidity, impacts, strong magnetic fields, static electricity and
extreme temperatures). Do not insert any objects into the instrument.
The system is powered via the power cable with a voltage that can cause physi-
cal injury. Even after disconnecting the system from the power supply, dangerous
voltages can temporarily occur due to capacitance.
Extreme care must be taken with pressure connections when using hazardous or
toxic media.
Repairs must only be performed by authorized service personnel.
i
Additional safety notices are found throughout this manual.
Notice
Operating Instructions - CPG2500
Precision Pressure Indicator
CPG2500
9