Audiolab M-ONE User Instructions page 3

3; !Hfuujoh!Tubsufe
Welcome to Audiolab and congratulations in your investment in the M-ONE Bluetooth
Integrated Amplifier.
M-ONE is a tour-de-force in integrated amplification, combining the role of a
sophisticated and versatile control unit that accepts a multiplicity of input sources with a
highly charged power amplifier that will match superbly with any loudspeaker.
If you were able to look inside you would find a marvel of electronic engineering
encompassing an ultra-high performance DAC (Digital to Analogue Converter) that
maximizes the musical capability of the M-ONE.
In addition versatility is provided via the Bluetooth (with aptX codec), USB, iPhone/iPad
and Digital coax connections as well as two analogue line inputs. Support PCM and DSD
decode, sampling rate high to PCM 384kHz and DSD256.
Whatever source of music you prefer to use, M-ONE will delight your ears with an
engaging and dramatic presentation that we are sure you will continue to enjoy for many
years to come.
Please read through this manual to obtain the very best performance from M-ONE.
Signal Input:
• One external SPDIF stereo LPCM coaxial digital input
• One external SPDIF stereo LPCM optical digital input
• One Bluetooth aptX wireless high fidelity input
• One 12V trigger input
• USB 2.0 port for replaying stereo form a compatible host
• IOS docking for iPhone/iPad/iPod
Signal Output:
• Loudspeaker output.
Operating Features:
• Bluetooth aptX wireless high fidelity Lossless transmission
• Automatic detection decoding of external digital input source.
• Selectable digital fillers setting.
• Mute and balance remote controls.
• Automatic trigger post equipments via 12V trigger output.
• Three display brightness available with on/off options.
• Auto standby function with function on/off options.
Unpacking
Unpacking the product fully. The carton should contain:
• The Audiolab M-ONE
• One M-ONE power cord suitable for your area.
• CD-ROM for USB driver
• This instruction manual.
If an item is missing or damaged report this to your dealer as soon as possible. Retain the
packing for safe transport of your unit. If you dispose of the packing, do so with regard to
any recycling regulation in your area.
Placement
The unit is designed to run warm during normal operation but ensure you do not black
any ventilation openings.
Place the unit on a sturdy shelf or table. If you use an equipment rack ensure the unit has
adequate ventilation and is on its own shelf. To minimize any interference place the power
supply in a stable location as far from sensitive analogue input as possible.
Ensure your mains voltage corresponds to the rating plate on the rear of the product'
s power supply. If in doubt, consult your dealer. If you move to an area with a different
mains voltage seek advice from an Audiolab appointed dealer or a competent service
technician.
Page 2