Silvercrest SWV 733 A1 User Manual And Service Information page 309

SilverCrest SWV 733 A1
Register WPS
Here, you can connect the dual-band wifi range extender to a WPS-enabled end device. Click on the
Start button to start WPS. The Power/WPS LED (4) of the dual-band wifi range extender now flashes
rapidly for approx. 2 minutes. Within these 2 minutes, please press the connection button (WPS) on your
end device. For further details, please read the operating instructions for your end device. The dual-band
wifi range extender then automatically connects to your end device. Once the connection has been
successfully established, the field strength indicator (1) lights up. The dual-band wifi range extender can
then be used. You can stop WPS by clicking on the Stop button.
Status
The current WPS status of the dual-band wifi range extender is displayed here. The following indicators
are possible: Setting – the WPS scan is prepared, Starting – the WPS scan was started, Stopped
– the WPS scan was stopped, Successful – the WPS connection has been successfully established
and Failed – the WPS connection failed.
English - 307