Individual Settings; Overview Of Programmes - Bosch WAS 24462 Instruction Manual

Individual settings

Options buttons
The spin speed and temperature can be changed before and during the selected programme
runs. Effects depend on the programme progress.
°C (Temperature )
The washing temperature displayed can be modified. The maximum washing temperature
that can be selected depends on the programme that has been set.
(Finished in)
When you select the programme, the relevant programme duration is displayed. You can
delay the start of the programme before it begins. The "Finished in" time can be set in
increments of one hour up to a maximum of 24 hours. Press the
the desired number of hours is displayed (h = hours). Select
(Spin speed) / (Rinse Hold = no Final spin)
You can change the spin speed displayed or select
remains in the water after the final rinse
speed depends on the model and on which programme is currently selected.
Additional functions
and overview of programmes, page 7
SpeedPerfect Washes in a shorter time but with a washing outcome comparable to
that of the standard programme. Maximum load
programmes, page 7.
EcoPerfect For saving energy with a washing performance comparable to that of
the standard programme.
(Easy-iron) Special spin sequence with subsequent fluffing. Gentle Final spin at
reduced speed - residual moisture in the laundry slightly increased.
(Water Plus) Increased water level. Gentler treatment of the laundry..
Childproof lock and reloading
You can lock the washing machine to prevent the functions you have
set from being changed inadvertently.
Childlock/
Activation/Deactivation: After the programme has started/finished,
appliance lock
press and hold
Note: the Childlock remains activated until the start of the next
programme, even after the machine has been switched off.
Then deactivate the Childlock after the machine has been switched
back on.
YES If you want to add subsequent items of laundry after the programme
Reload has started, press
reloading is possible.
If YES lights up and
NO flashing: wait until YES lights up.
Note: do not open the door until YES lights up.
NO: reloading not possible.
Note: for safety reasons, the washing machine door remains locked
when the water level and/or temperature is high,
or during a spin cycle.
To continue the programme, press
Downloaded From WashingMachine-Manual.com Manuals
button repeatedly until
Start/Reload.
(Rinse Hold = no Final spin, laundry
display panel). The maximum selectable spin
Overview of
Start/Reload for 5 seconds.
Start/Reload. The machine checks whether
Start/Reload flashes, reloading is possible.
Start/Reload.
Individual settings
Audible signal
1. Activate the
mode for
setting the
signal
volume
Set to
Button signals
2. Set the volume
for ...
* you may need to Set the
select the function volume*
several times.
Start/Reload
To start the programme or to subsequently load additional laundry, and to activate/deactivate
the childproof lock.
5
• +
1 step, the Press and 1 step,
display panel hold release
lights up
Information signals
skip
1 step Set the
volume*
•
Set to
6