Table of Contents
Advertisement
9.1.3.
Top Case
1. Remove the 3 Screws (A).
2. Slide Top Case rearward and open the both ends at rear
side of the Top Case a little and lift the Top Case in the
direction of the arrows.
NOTE:
The FUNCTION BUTTON, which can be easily iso-
lated from the Top Case, should not be pressed dur-
ing disassembly or installation in case of scratching
the components.
9.1.4.
Front Panel Ass'y
9.1.4.1.
Tray Top
1. Put deck so that bottom can be seen.
2. Insert the Paper clip, etc. into the hole on the bottom of
BD Drive and slide the Paper clips, etc. in the direction of
the arrow to eject tray slightly.
3. Remove the tray top from the tray section.
NOTE:
For there are only two claws for the Tray Panel on the
left and right sides but gap in the middle, be sure that
both claws have been installed in place during instal-
lation.
34
Advertisement
Table of Contents
