GE GSD500 Use And Care Manual page 4

How
to
Ouerate
Vour
dshwasher
5.
w
STEP 1. Load your dishwasher
with dishes, silverware, pots, pans,
bowls, etc. according to
instructions on pages 8 and 9.
STEP'2. Add detergent to the
detergent dispenser. Make sure the
Cycle Indicator Dial is at OFF
position before adding detergent.
(See pages 6 and 7.)
Use rinse aid agent to help prevent
spotting. (See page 6.) - -
STEP 3. Select DRYING Option.
u
HEATED
DRYING
fu#E#:
HEATED DRYING. Turns the
drying heater on for fast drying.
Available on all cycles except
RINSE & HOLD.
NO HEAT DRYING (Energy
Saver). Turns the drying heater off
to save energy, Dishes will dry
naturally over a longer period such
as overnight. Available on all
cycles.
If you need your dishes sooner,
open the dishwasher door after the
cycle is complete to reduce the
natural drying time.
Use of this option reduces the
electrical energy used by this
moclelapproximately
7'%0for
the
NORMAL WASH cycle.
STEP 4. Select the Cycle and start
dishwasher.
If your dishwasher drains into a
food waste disposer,operate the
disposer until it is empty before
starting the dishwasher. (See Cycle
Selection Hints on next page.)
To obtain the benefits of a
complete cycle, be careful that you
do
riot ti.u+
the did
any furthir
than necessary
to start the
dishwasher.
@ I?or NOIUVLAL WASH cyc~e:
a. Latch the door.
OaWaON
LIGHT
WASH
@
de
ORYING *
EJ
RINSE & HOLD ~usE 'i!/I!i%'opTl~N~
b. Slowly turn Cycle Indicator Dial
to ON position to start the cycle.
You will hear the motor start.
There is a time de~aybetween
stm~-upand water fill so you
will not hear any wash action
right away.
@
For'LIGHT' 'WASHCytm!:
a. Be sure door is uniatched.
O$=ON
UGHT
WASH
@
4
4
DRYING @
s RINSE& IIOLO @t!%f~opTloNl
b. Slowly turn Cycle Indicator Dial
to
LIGHT WASH position.
c. Latch door to start the cycle.
e For RINSE & ~~~~ 4@t3:
a. Be sure door is
unlatched.
b. Select NO HE.ATDRYING '
option.
c. Slowly turn Cycle Indicator Dial
to RINSE & HOLD position.
d. Latch door to start the cycle.