Table of Contents
Advertisement
Performer
Some of the most popular microphones come with a set screw that locks the mic cable connector to the bottom of the
microphone. This set screw can be used with the M33 connector. We have provided a spare set screw and allen wrench
in case you have misplaced the one that came with your mic. You may also drill and tap a 4-40 hole in other micro
phones to use the set screw. See figure 2 below. If you don't use the set screw, the wavy rubber ring that is provided
can be used to remove most of the play between the M33 transmitter and your microphone.
LECTROSONICS, INC.
6
Advertisement
Table of Contents
Need help?
Do you have a question about the Freedomike Performer and is the answer not in the manual?