Advertisement
ADVANCED SETUP OPTIONS
If the Wall Thermostats setup menu is required and has been ena-
bled on the MLM application or if you have purchased a setup mod-
ule, the following display/setup options will be available (long press
the menu button until the unit beeps and release to enter the setup
menu on the wall thermostat). If adjustable, the menu items value
can be adjusted with the up/down buttons and entered using the
enter button. Each press of the menu button cycles through each
option available.
1. Supply Air Temperature Display (CO)
2. Room Temperature Display (r)
3. Motor Manual Mode and Adjust
4. Maximum Motor Limit Adjust (dr)
5. Minimum Motor Limit Adjust (dr)
6. Heater Manual Mode and Adjust (Ht)
7. Control Zone Setup
a. Loop Select (LS)
b. Control Input Select (rS)
8. Set Point Adjust
WALL THERMOSTAT DISPLAY OPTIONS
The following display options are available. Each option is available
individually or as a combination of options:
Edit Setpoint Disable
Setpoint Display
Enable Setup Menu
To activate, connect to the relevant diffuser on the MLM app, max-
imise the diffuser, select the wall thermostat and click on Display
Setup as shown in the pictures below. Select the option required and
press enter or click write.
Edit Setpoint Disable
Edit Setpoint Disable prevents the user from editing the Setpoint on
the Wall thermostat.
Setpoint Display
Setpoint Display, displays the setpoint instead of the room tempera-
ture.
Enable Setup Menu
Enable Setup Menu activates the advanced setup options. See Setup
Menu Options instructions below.
Combination of Display Options
Select any combination of the above options if required.
Advertisement
