SKUTCH BA-1000 Technical Reference Manual
Telecommunication
dialer
Hide thumbs
Also See for BA-1000:
- Operation manual (10 pages) ,
- Operation manual (18 pages) ,
- Technical reference manual (37 pages)
Subscribe to Our Youtube Channel
Related Manuals for SKUTCH BA-1000
Summary of Contents for SKUTCH BA-1000
- Page 1 209 Kenroy Lane, Suite 9 Roseville, California 95678 916-786-6186 http://www.skutchelectronics.com BA-1000 Telecommunication Dialer Technical Reference Manual Version 4.04...
-
Page 2: Table Of Contents
! No Answer Redials ............9 ! 6pm Redials..............9 Table Of Content ! 15 Minute Busy Redials..........9 ! Do Not Dial List ............9 ! Dialing ................9 Pause During Dialing ............. 10 TABLE OF CONTENT......... 2 ! End Of Session ............10 ! Manual Call Abort ............ - Page 3 ! Exit Playback Mode ...........17 ! Mic comp= On............24 ! Volume Control ............17 ! Play Line= Off............24 ! Delete HU= Off............24 0 MEMORY EDIT..........17 ! CPC Detect= On............24 ! Reviewing Phone Numbers........18 ! TAD Redial= Off............25 ! Edit A Phone Number..........18 ! Clock Skip= Off ............
-
Page 4: System Overview
! 32 Digit Pre-Dial String BA-1000 as an emergency dialer, the clock control can be disabled in the System Setup. The BA-1000 supports a pre-dial string of up to 32 digits. ! System Features The pre-dial string can contain touch tone digits and control codes that are dialed before each phone number;... -
Page 5: Computer Linkage
BA-1000 uses. Then, just put the ZIP cartridge SYSTEM to this type of phone system, an RJ-11 jack must be into the BA-1000 system and it is ready to call those numbers. ordered from your local telephone company. It should be noted... -
Page 6: The Menu
MENU. The Menu 2 Number Entry When the BA-1000 is at the MENU, it will shut all power This mode is used to enter phone numbers into a dialing down after 15 minutes of inactivity. You can return the unit file. -
Page 7: Area Code Entry
5 to erase all the numbers or work when manually entering phone numbers, one at a time, on ~ if you don’t want to. the BA-1000. To use this feature, make sure the Pers. Msg. Your current ENTRY setting is “On” in * System Setup. Now, after you enter a... -
Page 8: Exiting
! Exiting The system uses the default of 9999 if you press then release # # ; or press then release any digit to clear the display, then enter a new 4 digit end suffix (no * * ’s allowed), followed To exit this mode, you can return to the MENU or go directly to DIAL FILE mode from the following screen: by #... -
Page 9: Dial File
Before the system calls each number, it will search for the next callable number and display the following during the The variable start entry lets you force the BA-1000 to start search: calling from any entry position you choose. To access this... -
Page 10: Pause During Dialing
If the line is in use, the system will wait for the line to become available and it will show the following: The volume on the BA-1000 can be increased by multiple pressing then releasing of the 9 9 button. You can decrease the... -
Page 11: Disk Tools
5 Disk Tools 1=Copy Prompts 3=Next Option NOTE: Make sure you have already formatted the COPY The BA-1000 offers several basic disk utilities for setting Copy). You can press then release 1 ZIP disk (See Prepare to up the ZIP disk and copying files. To enter this mode press then... -
Page 12: Erase The Main Message
Now, eject your current disk; during this copy process, it 1=Copy Num File will be referred to as the MASTER disk throughout this 3=Next Option process. Insert a new blank ZIP 100 disk and wait until it comes up NOTE: Make sure you have already formatted the COPY to the MENU;... -
Page 13: Hang Ups
This entry shows the total answering machines the system Press then release # # or detected in the last session. The volume on the BA-1000 can be increased by multiple ~ to return to the MENU. pressing then releasing of the 9 9 button. You can decrease the volume by multiple pressing then releasing of the 7 7 button. -
Page 14: Out Messages
lower does nothing. At max volume, trying to go higher does Get Response nothing. The volume control only adjusts the volume you hear 0-9 or * #=Next over the speaker, not what the caller hears, and it only adjusts the volume for Dial File and Order Taking modes. NOTE: NOTE: If you record a message, and don’t talk at the This volume can only be adjusted while the system is: end, so the system stops on its own, the system will remove... -
Page 15: Branching
Once you have selected a transfer code, and pressed then When the old prompt has been completely erased, the display will show: released #, the system will start recording the next prompt (unless you chose 9 = End of Prompt * = Response &... -
Page 16: Answer Device Msg Playback
When the system reaches the end of the prompt, it will return you to the MENU. ! Volume Control ! Recording Answering Machine The play volume on the BA-1000 can be increased by ONLY Prompt pressing then releasing the 9 9 button several times. You can... -
Page 17: Play Dial File Responses
The time the call came in (the 1 5 digits are the hour, 08 The play volume on the BA-1000 can be increased by = 8 o’clock, the : is a spacer, then the minute, 02 = 2 pressing then releasing the 9 9 button several times. -
Page 18: Reviewing Phone Numbers
This mode is used to edit the phone number entries of the released # # to leave the number unchanged. You can change current Dial file. You can also access special features such as: the dialing status by pressing then releasing * * , repeatedly, Duplicate Delete, File Restore, Computer Linkage and Print Memory. -
Page 19: Search Mode
The System Setup mode allows you to change the one entry of each number stays in the file, while in Edit Mode. operating parameters of the BA-1000. To enter this mode press then release ~ ~ , it will show the following: Version 4.04... -
Page 20: Change The Time/Date
The current time will appear in the bottom of the display. 0-Menu-v4.04--Mo You can enter a new time followed by # # , or just press then 10/01/02 08:00am release # # to keep the current time. You can change between Enter: * * then # # and it will show the following:... -
Page 21: Answer Detect= 0
this mode, press then release ~ ~ to return to the main press then release # # to go to the next option. You can press System Setup path. then release ~ ~ to exit setup mode. ! Answer Detect= 0 When attended mode is enabled, the system will beep at you, when a response is detected, and wait for you to grab the line;... -
Page 22: Inring Delay= 2
! InRing Delay= 2 press # # to go to the next option, or press then release 1 1 to change the string, and it will show the following: This option allows you to select how many in coming rings the system will wait before it activates, when in Order Enter NEW String Taking mode. -
Page 23: Load App Presets
! Load APP Presets Remote Code=0506 1=Change #=Next This option allows you to reset the system back to factory defaults or load the settings for a predefined application. The Press then release 1 1 to let you change this code, then display will look as follows: enter the new code followed by # # ;... -
Page 24: Pulse Rate= Slow
Press then release 1 1 to toggle between On and Off; ! Play Line= Off press then release # # to go to the next option. You can press This option allows you to choose whether the system then release ~ ~ to return to the Total Calls screen. -
Page 25: Tad Redial= Off
! TAD Redial= Off Pers. Msg.= 1=Change #=Next This option allows you to enable redialing of answering machines. By default, answering machines are not included in Press then release 1 1 to toggle between On and Off; the Redials option; this option allows you to include them. The press then release # # to go to the next option. -
Page 26: Post Pound= Off
This value should NOT be adjusted unless the system’s answer detect. CAUTION: This value should instructed to by a Skutch Service Technician. For this option, 1 NOT be adjusted unless instructed to by a Skutch Service = .1 seconds. The display will look as follows: Technician. -
Page 27: Rm Redial= Off
! RM Redial= Off ! Remote Record a Play Only Message This option allows system to retry all phone numbers that were previously logged as recorded messages. When this option At the remote menu (after the 3 tone beep), enter: is On, the system will allow recorded message phone numbers to be called. -
Page 28: Outgoing Prompt Codes
*5 – Dial the rest of the phone number string as touch Load APP Presets tones. 0 to 1 #=Next *60 – End the call, as a Response, without doing Now press then release 0 0 and it will show the following anything else (like playing a message). -
Page 29: Disconnect Issues
Disconnect condition. The following are The customer will be charged for the following: the disconnect systems incorporated into the BA-1000. A flat rate labor charge. The failure to detect a dialed digit within 5 seconds of a All parts replaced. -
Page 30: Year Limited Warranty
1 Year Limited Warranty This SKUTCH PRODUCT is warranted against defects for a period of one (1) year from the date of the original invoice; excluding the ZIP disk, which is warranted for a period of 90 days from the date of the original invoice. Within this period, we will repair it without charge for parts and labor.
Need help?
Do you have a question about the BA-1000 and is the answer not in the manual?
Questions and answers