Related Manuals for Mako SROM 1195
Summary of Contents for Mako SROM 1195
-
Page 1: Instruction Manual
Instruction Manual VARIABLE SPEED JIGSAW WITH LASER GUIDE Model SROM 1195 Our tool range has you covered for DIY. Whatever the job, make light work of it with MAKO tools. - Page 2 Product Features: Lock-on button On/off Trigger Switch Air Vents Allen Key Holder Dust Extraction Port Jigsaw Base Plate Pendulum Action Adjuster Blade Roller Rip Fence Attachment Points 10. Quick Release Chuck 11. Safety Guard 12. Laser On/Off Switch 13. Speed Control...
- Page 3 Mako 2 Year DIY Warranty: All Mako Power Tools are backed by a comprehensive 2 year DIY warranty. If for any reason you experience a fault with this power tool, please contact the retailer that it was purchased from, present the receipt and warranty card (at the back of the operating manual), for a full refund or replacement.
-
Page 4: Table Of Contents
Work Area safety o Electrical Safety o Personal Safety o Power Tool Use and Care o Service • Mako Jig Saw Safety Instructions • Mako Jig Saw Operating Instructions • Maintenance & Cleaning • Mako Jig Saw Technical Data... -
Page 5: Work Area Safety
GENERAL POWER TOOL SAFETY WARNINGS: WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. -
Page 6: Power Tool Use And Care
Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. -
Page 7: Mako Jig Saw Safety Instructions
MAKO JIG SAW SAFETY INSTRUCTIONS: a) Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. -
Page 8: Mako Jig Saw Operating Instructions
MAKO JIG SAW OPERATING INSTRUCTIONS: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serous injury. This Jig Saw is suitable for making straight, curved cuts and mitre cuts on squared work pieces made of plastic, wood and metal. - Page 9 Cutting speed: This Jig Saw is equipped with a variable speed dial. The blade stroke rate may be adjusted during operation by adjusting the dial to the desired speed. As a general rule, slower speeds are best for denser materials and faster speeds are best for softer materials. Rotating the dial to MAX will override the speed control and the saw will operate at full speed.
-
Page 10: No-Load Speed
MAINTENANCE & CLEARING: Before any work commences on the Jig Saw, ensure that it is unplugged from the power outlet. For optimum use, regularly check to see if any dust or foreign matter has entered the ventilations slots near the motor and around the on/off switch. Use a soft brush if required. Wear safety glasses to protect your eyes whilst cleaning.
Need help?
Do you have a question about the SROM 1195 and is the answer not in the manual?
Questions and answers