Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Owon RC204 zigbee
Summary of Contents for Owon RC204 zigbee
- Page 1 RC204 ZigBee Remote Control Quick Start Guide...
-
Page 2: Get To Know Your Device
1. Welcome The RC204 ZigBee Remote Control is used to control up to four devices either at one time or individually. Take controlling CCT Tunable LED bulbs as an example, you are able to use it to control the following. - Page 3 Main LED indicator All on and all off buttons Lock Switch Reset button Individual on/off buttons & status LED indicators...
- Page 4 Color temperature adjustment button Status button Brightness adjustment button...
- Page 5 2.2. Buttons and switch All on and all off button Use the all on and all off button to do the following: Turn on and off of all the binding devices such as LED bulbs, smart plugs, power relays. Four individual on/off buttons Use the on/off buttons to do the following: ...
-
Page 6: Micro Usb
2.3. Switch Lock Switch Use the lock switch to do the following: Set this device be able/unable to bind with other devices. 2.4. Micro USB The micro USB is used to charge the battery of this device. Connect RC204 to a power outlet using the standard Micro USB cable and USB power adapter. - Page 7 LED status What it means The battery charging is complete Green LED (when it is connected to a power solid adapter) 1. Indicate that you press and hold the one of the individual on/off buttons for three seconds, then immediately release this button will enter binding status (when you press and hold one of the individual on/off buttons).
- Page 8 Status LED indicators Individual on/off indicators LED status What it means The binding on/off device such as Green LED LED bulb is on (when it is bound to solid an on/off device and pressing the status button). Green LED flashes three Binding is successful.
-
Page 9: Get Started
3. Get started To get started, you will at least need: A SEG-X3 Smart Gateway 1 ~ 4 x CCT Tunable LED bulb LED622 (At least you will need one LED bulb) The SmartOWON mobile app Then follow the steps below: Step 1: Check the RC204 status. - Page 10 Step 3: Use a pin key tool to press the reset button. Then the device will add the ZigBee network of the gateway. Step 4: Check if this device added into the gateway. If the remote control is added into the gateway successfully, the main LED indicator will be green flashing for three times.
- Page 11 You are now able to control the LED bulb using the remote control on/off the bulb adjust brightness adjust color temperature Tips: to see operation details, please visit http://.owon.me/docs/user_guides.html to see the system user guides.
- Page 12 Q4. Can I use this remote control to control LED bulbs without the help of the gateway and the SmartOWON mobile app? A4: Yes. But the LED bulb needs to be based on standard ZigBee Lighting Link profile such as OWON LED622. If...
-
Page 13: Technical Specifications
you have LED622 bulbs, please use this device to bind with follow below: Note: All below devices need to return to factory default settings before your operation. (1): Place the RC204 Remote Control near to the LED622, press and hold the one of the individual on/off buttons of the RC204 for about three seconds until the LED flashes in green for three times. - Page 14 6. Appendix: Safety Notice WARNING: Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the device or other property. Read all the safety notices below before using the device. Avoid high humidity or extreme temperatures. ...
Need help?
Do you have a question about the RC204 zigbee and is the answer not in the manual?
Questions and answers