Muji MJ-EK5AEU User Manual page 5

How to Use (Continued)
4
. Turn on the power switch
The power turns off after the water boils.
Press the ON switch. The power light turns on.
Once the water boils, the power will turn off automatically.
(The power switch will return to its original position, and the
power indicator will turn off.)
Water Boils
Turn On
Light On
Light Off
5
. Unplug the kettle
6
. Pour out hot water.
Check to be sure the lid is on tight.
Remove the kettle from the power base.
Flip the lock lever to pour out hot water.
To pour
Slide toward
Be sure
the lid is
closed
tightly.
When finished
Slide toward
7
. When finished
When finished, pour out any remaining water.
7
<Boiling Time>
Boiling time varies according to
water volume, water temperature,
room temperature, etc.
Boiling Time (water at 23˚C/73.4°F)
• 500ml...
approximately 3 min. 30 secs.
<No Heat-Retention Function>
After boiling, water will eventually
return to room temperature.
Only boil as much water as you
plan on using.
<To Turn the Power Off when
Automatically
Boiling Water>
Turns Off
Move the power switch to the
OFF position.
WARNING
• Even when the lock lever is
closed, do not tip, shake, or
knock over the kettle. Hot water
may come out of the pour spout,
resulting in burns or other injury.
• Do not open the lid immediately
after boiling water. Doing so
may cause burns or other injury.
• Pour hot water carefully.
Pouring out a large amount of
hot water all at once may result
in burns or other injury.
Notice
• This electric kettle comes with
a safety switch to turn the
power off when it detects
steam. Steam may condensate
and drip from the bottom of the
kettle. This is not a
malfunction.
• The kettle and lid may become
hot after a while if hot water is
left inside. This is not a
malfunction.
Attention
• Do not leave hot water in the
kettle. Doing so may result in
discoloration, corrosion, or odor.
• Clean the kettle after using.
• Maintain and clean the kettle on
a regular basis.
Usage and Requests
• Use the cord holder to adjust the length of the power cord. Place the cord in the
cord outlet.
Bottom of Power Base
Cord Outlet
Cord Holder
• This kettle does not have a heat-retention function. Only boil as much water as
you intend to use.
The design of this kettle requires space between the underside of the lid and the surface of the water. Filling
past the water fill line is dangerous, as it may cause hot water to spill out of the pour spout and steam spout.
Fill Line
(500 ml)
• Pour out remaining water
Leaving water inside the kettle may result in discoloration or corrosion.
• Regularly clean the kettle (water stains, etc.).
See P8 Care and Maintenance.
Leaving stains will result in loud noises during boiling and pour spout blockage.
• Set the kettle properly in the power base.
If the kettle is not seated properly in the power base,
the switch will not turn ON.
Connection
Properly
seated
<Clanking Sound>
You may hear a clanking sound when you move the kettle. The sound comes from the valves in the
kettle. It is not a malfunction.
4
WARNING
Use the cord outlet to
prevent the kettle from
tipping over and keep
the cord from damage
that could cause fire
or electrocution.
WARNING
5 0 0 m l M A X
Do not fill past the fill line (water
lines are estimates).
3 0 0 m l
Filling past the water line may
cause hot water to spill from the
1 0 0 m l
top or base of the kettle, resulting
in burns or other injury.
Attention
If the kettle does not work when properly seated,
stop using the kettle, unplug the unit, and contact
the store it was purchased from.