1.- SWITCHING THE TAXIMETER ON.
Taximeter in OFF.
Taximeter in ON pressing the O key. If there is a pasword programmed, the second point in the
status display, will blink waiting the introduction of the code.
If no passowrd is required or once the correct code is introduced the taximeter goes to ON.
Taximeter in OFF pressing the
FOR HIRE
HIRED
STOPPED
MEASURE
FOR HIRE
HIRED
STOPPED
MEASURE
FOR HIRE
HIRED
STOPPED
MEASURE
O
key.
RATE
£ FARE P.
mi
£ EXTRAS P.
RATE
£ FARE P.
mi
£ EXTRAS P.
RATE
£ FARE P.
mi
£ EXTRAS P.
hh.mm
hh.mm
hh.mm