Absaar AB-MJS150 User Manual page 5

EN
RISK OF EXPLOSION!
- Do not expose the device to direct sunlight!
- When using the Mini Jumpstarter, do not smoke and keep any
incandescent objects at a distance!
- Do not use the Mini Jumpstarter in confined smoke-filled spaces such
as in the hold of a motorboat.
- Do not use the Mini Jumpstarter near to propane tanks.
- The clamps of the Mini Jumpstarter must be connected to the correct
polarities of the vehicle:
• Red Positive (+) clamp of the Mini Jumpstarter to the Red Positive
(+) terminal of the vehicle battery.
• Black Negative (-) clamp of the Mini Jumpstarter to the Black
Negative (-) Terminal of the vehicle battery.
An Inversion of polarity can damage the Mini Jumpstarter!
FIRE HAZARD!
- Do not crush.
- Do not perforate.
- Do not make the clamps touch each other or create an electrical
connection between them with a piece of metal or a conductor. This
can damage the Mini Jumpstarter or create a hazard.
- Always disconnect the connector of the clamps immediately after use.
- Do not store the Mini Jumpstarter with the clamps connected to the
device.
- The Mini Jumpstarter is only designed to be used for a very short
period of time. Each start-up attempt should not exceed 3 seconds.
Using the Mini Jumpstarter for more than 3 seconds can damage it.
Wait for 1 minute between each start-up attempt.
Caution: Working temperature. Do not expose to working
temperatures in excess of +60°C (+140°F) or less than -20°C (-4°F).
Using the Mini Jumpstarter above or below these temperatures can
reduce the capacity of the Mini Jumpstarter's internal battery or
shorten the service life of the battery.
5