Technical Information - oticon Alta2 Instructions For Use Manual

Technical information

The hearing aid contains a radio
transmitter using short range magnetic
induction technology working at
3.84 MHz. The magnetic field
strength of the transmitter is
< -42 dBμA/m @ 10m.
The emission power from the radio
system is well below international
emission limits for human exposure.
For comparison, the radiation of the
hearing aid is lower than unintended
electromagnetic radiation from, for
example, halogen lamps, computer
monitors, dishwashers, etc. The
hearing aid complies with international
standards concerning Electromagnetic
Compatibility.
54 About Start up Handling Options Warnings
Due to the limited space available on
the hearing aids, all relevant approval
markings are found in this document.
More Info
USA and Canada
The hearing aid contains a module
with:
FCC ID: U28FU2BTERIT
IC: 1350B-FU2BTERIT
The device complies with Part 15 of
the FCC Rules and with Industry
Canada's licence-exempt RSSs.
More information: www.oticon.global
Operation is subject to the following
two conditions:
1. This device may not cause harmful
interference.
2. This device must accept any
interference received, including
interference that may cause
undesired operation.
Changes or modifications not expressly
approved by the party responsible
for compliance could void the user's
authority to operate the equipment.
55