Yamaha HTR-5920 Service Manual page 5

• SET MENU TABLE
MAIN MENU
1 SPEAKER LEVEL
2 SPEAKER SET
3 SPEAKER DISTANCE
4 DIMMER
• SURROUND MODE
MAIN MENU
PLII MUSIC
• RESETTING THE SYSTEM
Use this feature to reset all the parameters of this unit to the initial factory settings.
Note:
• Be sure this unit is in standby mode.
• This procedure completely resets all the parameters of this unit.
• The initial factory settings are activated next time you turn on this unit.
1. With this unit in standby mode, hold down TONE CONTROL key on the front panel and press STANDBY/ON key.
"RESET > NO" appears in the front panel display.
Note: To cancel the initialization procedure without making any changes, press STANDBY/ON key.
2. Press TONE CONTROL key to select "RESET > YES".
3. Press STANDBY/ON key to confirm your selection and set this unit to the standby mode.
SELECT MENU
FRONT L
CENTER
FRONT R
SURROUND R
SURROUND L
SUBWOOFER
FRONT
CENTER
SURROUND
SUBWOOFER
FRONT
CENTER
SURROUND
SELECT MENU
PANORAMA
DIMENSION
CT WIDTH
VALUE [INITIAL]
-10 dB to +10 dB, [0 dB], 1 dB step
LRG, [SML], NONE
[YES], NONE
1 ft to 30 ft, [10 ft], 1 ft step
-2, -1, [0]
VALUE [INITIAL]
ON, [OFF]
-3 to 3, [STD], 1 step
0 to 7, [3], 1 step
HTR-5920
5