Powering On/Off; Pairing The Remote Control - LEECO uMax85 User Manual

Powering On/Off

Step 1: Plug TV into a power outlet.
Step 2: Turn the switch under the TV to ON mode.
Step 3: To turn on/off the TV, press power button on
your remote. Note: Wait about five seconds for TV to
fully power on.
Step 4: A light at the bottom center of your TV indicates
the power status:
Blue: TV is on
Red: TV is off
Step 5: To enter power saving mode, press and hold
the power button for two seconds.
Note: Rebooting will prompt Android TV™ setup to
relaunch, which can take up to 35 seconds.
Remote Control Pairing
Slide battery cover off of remote and locate pairing
button. Insert 2 AA batteries, press and hold button
until connection is confirmed on screen.
Note: In order to connect, remote must be less than
eight inches from lower section of TV.
PAIRING
12