Osd Settings - Philips FLAT PANEL 140S User Manual

The OSD Controls
6.2) When finished with RED, press the
button to adjust the color green.
6.3) When finished with GREEN, press the
button to adjust the color blue.
6.4) When all adjustments are complete, press the
the MAIN CONTROLS window. CLOSE MAIN CONTROLS is highlighted.
Smart Help
After returning to MAIN CONTROLS...
Smart ... to continue to OSD SETTINGS, press the
Help
highlighted. Next, start with step 3 under OSD SETTINGS and follow the directions.
... to exit completely, press the

OSD SETTINGS

You can place the MAIN CONTROLS window almost any place on the screen that is convenient for you.
OSD SETTINGS allows you to do this. It is composed of HORIZONTAL and VERTICAL adjustments you
can make by simply following the step below.
file:///E|/Potomac/english/140S/osd/osd_cont.htm (11 of 16) [4/19/2000 4:35:09 PM]
button to highlight GREEN. Next, press the
button to highlight BLUE. Next, press the
button to confirm your adjustments and return to
button.
RETURN TO TOP OF THE PAGE
button until OSD SETTINGS is
or
or