Jaycar Electronics QC3624 Installation And Operating Instructions Manual page 7

System Tray Icon
Icon image Name
System Tray
Channel Display
Two Way Audio
Door Control
Gate Control
Volume
Record
Setup
CAUTION
． By default, the monitor screen will be ALWAYS ON. If you want to save power
consumption, please setup the idle mode in 'System Setup' sub-menu. ('System Setup' >
'Power Saving' > 5Minutes/10Minutes/ALWAYS ON).
Function
System Tray-Hide & display tray icon
Press to switch display channel
Press to start/stop communication.
Press to open the door (Dry Contact B)
Press to open the gate (Dry Contact A)
Press to adjust receiver volume
Press to start/stop recording
Note:
1. Record function cannot be stopped unless the
countdown OSD completes
2. Receiver starts to record for 1 minute when a visitor
presses the doorbell. If users answer the visitor, one
more minute will be recorded.
3. Users cannot switch channel to another camera
when recording function is active.
Press to enter setup menu
6