Advanced Settings; Camera Setup - Jaycar Electronics QC3624 Installation And Operating Instructions Manual

ADVANCED SETTINGS

CAMERA SETUP

Item Function
CH1 (Doorphone 1)
1 - Pair
- Brightness
CH 2, CH3, CH4
(CCTV Camera)
2-4
- Pair
- Brightness
- Camera On/Off
5 Return to Setup Menu
In this section you can pair and adjust the brightness setting for
door unit and optional CCTV cameras (for more information on
where to purchase the additional CCTV camera please contact
vendor).
Please note, channel 1 is dedicated to door unit only. Additional
CCTV cameras are to be paired to channel 2, 3 and 4.
By default the video of the door unit is in full screen mode and
with additional CCTV cameras added to the system the receiver
display will automatically be in quad mode.
For any reason you need to re-pair the door unit to the receiver,
please first tap on channel 1 and select pair. You will have 30
seconds to press the pair-key, which is located in the back of the
door unit (see "mounting the door unit" section for more detail).
"Pairing Fail" will be displyed if pair-key not pressed within the 30
seconds period (please make sure the door unit is correctly
powered), tap on pair icon to re-initiate the pairing process again.
11