1)Romove the 12pcs screws(BT3x12) on the side cabinet to discharge the rear cabinet and place it well;
1)Romove the 12pcs screws(BT3x12) on the side cabinet to discharge the rear cabinet and place it well;
2)Remove the FFC cable on IPOD BD from Main BD,1st get remote control lens out, then remove the 4pcs screws (PA 2.3x8) which fix IPOD BD to discharge IPOD BD;
3)Remove all cables on Main BD;
PS: Get your hand to the Main BD as close as possible when you unplug the cables to avoid destroying cables;
4)Remove the 4pcs screws(PT 3x8) on Main BD, rip off the black paper from FCC cable on CD deck, discharge Main BD and place it well;
4)Remove the 4pcs screws(PT 3x8) on Main BD rip off the black paper from FCC cable on CD deck discharge Main BD and place it well;
pic 1
pic 1
pic 1
pic 1
pic 1
pic 1
5)Remove the 4pcs screws(PT3x8) on CD deck, please add some soldering on the weld protect point and keep it in a ant-static bag;
6)Remove the 4pcs screws(PA 2.3x8 ) on Display BD, discharge Display BD and paste protect film on it and place it well;
7)Draw the CD door with your right hand,press one buckle with your left hand(pic 7-1),then press the other buckle(pic 7-2),discharge CD door and place it well;