Pre-Requisites - Siemens ST950 Handbook

667/HB/20168/000
This handbook details:
The hardware requirements for producing the configuration.
A brief outline of how to use the configuring system to enter data from the
completed customer specification sheets into the computer.
667/HB/32921/007
This handbook details:
The facility for monitoring Helios CLS without LMF modules using the "LED Lamp
Switch" on a 230V ST950LED Controller.
667/HB/45040/000
This handbook details:
Guidance for the correct type and location of Feeder pillar.
Maximum Length of cable between Feeder Pillar and Controller.
Cut-out requirements and Fusing requirements.
667/RE/29050/000
This spreadsheet documents Siemens Traffic product Elexon codes listed by part
number.
1.3.1 Related Drawings
667/GA/32910/ETC
667/GA/32995/ETC
667/GA/27087/000
1.4

Pre-Requisites

Anyone using and/or working on an ST950 Controller will need the relevant Installation,
Commissioning and Maintenance Handbook.
1.4.1 Qualifications
Only skilled or instructed personnel with relevant technical knowledge and experience,
who are also familiar with the safety procedures required when dealing with modern
electrical/electronic equipment, are to be allowed to use and/or work on the equipment.
All work shall be performed in accordance with the Electricity at Work Regulations 1989
or the relevant local, state and government regulations.
Security classification
Version
Last Editor
Document Name
Copyright © Siemens plc 2015. All Rights Reserved.
Intersection Configurator IC4 Users Handbook
Handbook Supplement For Monitoring Helios CLS Signals
Isolators & Feeder Pillar General Handbook
Siemens OID Elexon Codes
ST950 Intelligent Detector Backplane assembly
ST950 I/O Card assembly
Equipment Mounting Frame assembly
Unrestricted
4
Paul Cox
ST950 General Handbook
Mobility Division, Traffic Solutions
Sopers Lane, Poole, Dorset, BH17 7ER
Page 14 of 107
Status Issued
Date 16-Jul-2015
Document No. 667/HB/46000/000
Mobility is a division of Siemens Plc