Resolution & Preset Modes - Philips Brilliance 150P4AG User Manual

Product Information
• White Chromacity
• Viewing Angle (C/R >5)
• Response time
sRGB
sRGB is a standard for ensuring correct exchange of colors between different devices (e.g. digital
cameras, monitors, printers, scanners, etc.)
Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible
device correctly on your sRGB enabled Philips monitors. In that way, the colors are calibrated and you
can rely on the correctness of the colors shown on your screen.
Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a
predefined setting as well as the color gamut. Therefore it is important to select the sRGB setting in the
monitor's OSD.
To do so, open the OSD by pressing the OK button on the front of your monitor. Use the down button
to go to Adjust Color and press OK again. Then move the down button to go to sRGB and press OK
again.
Exit this OSD.
After this, please don't change the brightness or contrast setting of your monitor. If you change either of
these, the monitor will exit the sRGB mode and go to a color temperature setting of 6500K.
For more information on sRGB, please visit:
Note: sRGB mode is not available while 'LightFrame
* This data is subject to change without notice.
Resolution & Preset Modes
• Maximum
• Recommended
14 user definable modes
14 factory preset modes:
file:///D|/C/english/150p4agb/product/product.htm (6 of 10) [2/24/2003 2:49:20 PM]
x: 0.283 y: 0.297 (at 9300° K)
x: 0.313 y: 0.329 (at 6500° K)
x: 0.313 y: 0.329 (at sRGB)
Upper >50° (typ.)
Lower >60° (typ.)
Left >75 ° (typ.)
Right >75 ° (typ.)
<=25ms (typ.)
www.srgb.com
TM
' function is activated.
RETURN TO TOP OF THE PAGE
1024 x 768 at 75Hz
1024 x 768 at 60Hz