Advertisement
Assembly and mounting instructions
Step 1: Assemble the stand
A. Connect the base to the column.
a. Place the base with its wheels on the floor, and block the wheels to keep the
stand from moving while you assemble it.
b. Fit the alignment holes on the bottom of the column over the alignment pins at
the center of the base.
Note: From this point, hold the column in place until the column is secure.
c. Slide the column studs through the holes in the bottom of the column and
through the base.
d. Loosely thread column nuts onto the column studs from underneath.
e. Once you have put nuts on all of the column studs, fully tighten all of the nuts.
©2015 Microsoft. Microsoft, the Microsoft logo, and the Microsoft Surface Hub logo are trademarks of the Microsoft
group of companies. Microsoft Corporation One Microsoft Way Redmond, WA 98052-6399 USA
Advertisement
