Rear View - Philips BDL4230E User Manual

User Manual BDL4230E
2.2.

REAR VIEW

9
8
1. ENTER/VIDEO SOURCE button
• Use this button to select the input source.
• When the On Screen Display menu is active, use this as the SET button.
2. MENU button
• Use this button to engage the On Screen Display menu.
• When the On Screen Display menu is active, use this button to return to the previous menu.
3. /
• When the On Screen Display menu is active, use these as the UP/DOWN menu buttons.
• Press and hold the
4. /
• When the On Screen Display menu is active, use these as the PLUS/MINUS menu buttons.
5. POWER button
Use this button to turn the monitor on or put the monitor to standby.
6. Power indicator
Indicates the operating status of the monitor:
- lights green when the monitor is turned on
- lights red when the monitor is in standby mode
- blinks red when the monitor enters DPMS mode
- off when the main power of the monitor is turned off
7. Mount PC installation holes
Install a mount PC using these holes and M4 screws. (Maximum load: 2kg)
8. Cable retainer installation holes
Install the cable retainer using these holes.
9. Carrying handle
Use these handles when carrying the monitor by hand.
1 2
button
and
button
RETURN TO THE CONTENTS
3 4 5 6
buttons simultaneously for 3 seconds to lock or unlock all buttons.
100 mm
200 mm
7
210.4 mm
Dent depth:
6mm
35 mm