Philips BDDl321V Owner's Manual page 33

On Screen Display
Turns on or off the light sensor for automatic brightness control.
Users can use
Light
Sensor
Press
Users need to turn off remote control function when they want to use
RS232 protocol to control this unit from afar, so it will remote control
commands not to conflict with RS232 commands.
Remote
Users can use
Control
Press
To reset monitor TV's settings back to factory default.
Users can use
Factory
Reset
Press
Setup:Setup sub-menu is available in TV modes only. Press
menu selections.
TV mode (North America model)
file:///D|/My%20Documents/dfu/BDL3221V/english/320wn6/OSD/osddesc.htm (13 of 22)2005-11-07 12:48:05 PM
or to toggle between
On
Off
or to adjacent sub-menu selections.
or to toggle between
On
Off
or to adjacent sub-menu selections.
or to toggle between
No
Yes
to confirm.
to enter the sub-