Disassembly Procedure (Trs-Ms01) - Yamaha Tyros TRS-MS01 Sevice Manual

Tyros / TRS-MS01
I DISASSEMBLY PROCEDURE (TRS-MS01)
1. Rear Panel (Time required: about 1 min)
1-1 Remove the eight (8) screws marked [30]. (Fig.1, Fig.2)
(The screws to be removed are indicated by arrows on
the panel.)
2. AMP Assembly (Time required: about 3 min)
2-1 Remove the rear panel. (See procedure 1)
24
Cover
AMP Assembly
[30]: Bind Head Tapping Screw 4x20 MFZN2BL (EP040070)
[16]
[19]
[16]: Bind Head Bonding Screw-B 3x10 MFC2BL (EN335030)
[17]: Bind Head Screw-P 3x12 MFC2BL (EX601360)
[18]: Bind Head Screw 3x8 MFC2BL (ED330086)
[19]: Bind Head Screw-S 4x8 MFC2BL (EK396010)
* When reinstalling the rear panel, confirm that the pack-
ing is not damaged to avoid air leakage.)
(Fig.1)
[18]
Rear Panel
(Fig.2)
2-2 Remove the two (2) screws marked [17], the four (4)
screws marked [18], the four (4) screws marked [19].
The AMP assembly can then be removed. (Fig.2)
[30]
R L
TO KEYBOARD
[17]