Installation - Kangaroo KG 43H User Manual

Hot-cold water dispenser
Table of Contents

Advertisement

Available languages

Available languages

INSTALLATION

Precaution during installation
12A more
Use electric cord of proper capacity.
The plug should be rated for more
than 12A.
Sharing with other electrical products
in the same outlet will overheat the
outlet and may cause fire.
Avoid contact with hear or water.
Avoid placing product near source of
heat or steam such as gas range, oil
stove or near sink, or other place
where water may be splashed on
product.
14
Place the product on the hard level
surface.
Place products on the horizontal,
structurally
Sound floor.
Maintain sufficient distance from wall
at least 15 cm.
INSTALLATION
Grounding
- Grounding of the products is required to prevent electric shock;
- Place the ground rod deep into ground containing sufficient moisture;
- If a grounding terminal is installed, use this grounding terminal.
Installation method
- Do no excert excessive power when unpacking to avoid damaging the surface of
product body;
- Do not tilt the product more than 45 degree while moving the product. It may cause
manufuntion of product;
- When finishing installation do not apply electric power for at least one hour
thereafter;
- Always apply electric power after filling with water once water falling continuously
from hot-cold faucet;
- Applying electric power without water in the hot-cold water tanks will damage the
product.
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kg 44h

Table of Contents