How To Use The Product - Kangaroo KG 43H User Manual

HOW TO USE THE PRODUCT

Please observe the following precautions during installation:
1. Avoid heat, source of heat, water contacting with the product;
2. Place the product on the horizontal, structurally sound floor, maintain sufficient
distance from wall at least 15 cm.
3. Confirm electric power supply once water filling full to hot-cold water tank, if applying
electric power without water in the hot-cold water tank will damage the product.
4. Installing water bottle: Using designated bottle for water dispenser only, insert the
bottle into the top of the water dispenser, bubbles are generated inside the bottle
indication that water is flowing into the hot water and cold water tanks. After bubbles are
not generated any more, press the hot water valve until flows through it continuously.
5. Dust water drain: shut off 3 water faucets after water draining continuously of 3L –5L;
6. After applying power, about 30 minutes required to use hot water(85 -90 ), and
about 20 minutes for using of cold water(4 - 12 ). Turn off the hot water switch.
7. When the heating power has turnoff it means the temperature of the water in hot
water bucket has reached about 90 , the bucket is in warm-keeping state, temperature
lamp keep lighting. When the temperature drops to 85 then heating starts again, when
the temperature of the cold water rises to 10 the refrigeration starts again.
8. Usually detach the water tank from the drip tray.
9. Use only a designated bottle for the product. If use tap water, barley tea or any other
type of drinking water may shorten the life of the product.
16
HOW TO USE THE PRODUCT
Warning
1. This appliance is not intended for use by persons who are children, reduced physical,
sensory of mental capabilities, or lack of experience and knowledge.
2. If the supply cord is damaged it must be replaced by the manufacturer, its service
agent or similarly qualified person in order to avoid a hazard.
3. To avoid any hazard due to instability of the appliance, it must be fixed in accordance
with the instructions.
4. Always unplug the power cord before cleaning the product.
5. Never use detergent or chemicals.
6. Wipe the front and back or product with water-soaked, soft cloth.
7. Do not directly spray water on the surface of the product.
8. If dust or other foreign substance has accumulated on the condenser, wipe off with
water-soaked soft cloth.
17