GETTING STARTED
Installing the Battery
1. Install the battery.
Insert a coin or other flat object into the slot at the bottom of the battery compartment cover
and lift the cover up gently.
Insert the battery, contacts end first, and gently press the battery into place.
Replace the battery compartment cover, making sure all the tabs are secure and there are no
gaps around the cover.
NOTE: When inserting the battery, your device may power on automatically.
2. Plug the USB connector into the charger/accessory jack on the bottom of your device.
3. Plug the adapter into an electrical
outlet. Fully charging a battery
may take up to three hours.
4. Charge your battery.
5. Press the
Power
device on.
If device is activated, it will
turn on, search for Sprint
service, and begin the
setup application.
If your device is not yet
activated, see "Activating" for more information.
button to turn the
7 |
P a g e