Philips 200s4 User Manual page 48

Regulatory Information
Energy Star Declaration
This monitor is equipped with a function for saving energy which supports the VESA Display
Power Management Signaling (DPMS) standard. This means that the monitor must be
connected to a computer which supports VESA DPMS to fulfill the requirements in the NUTEK
specification 803299/94. Time settings are adjusted from the system unit by software.
NUTEK
Normal operation
Power Saving
Alternative 2
One step
Federal Communications Commission (FCC) Notice (U.S. Only)
file:///D|/My%20documents/dfu/J/english/200p4/safety/regs/regulat.htm (6 of 13)7/9/2004 12:36:43 PM
VESA State
ON
OFF
A E
s an NERGY
E
meets the NERGY
We recommend you switch off the monitor when it is not in use for quite a long time.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
PHILIPS
200P4
LED Indicator
Green
Amber
®
S P PHILIPS
TAR artner,
®
S
TAR guidelines for energy efficiency.
RETURN TO TOP OF THE PAGE
Power Consumption
< 65 W
< 1.5 W
has determined that this product