Philips 200s4 User Manual page 33

FAQs (Frequently Asked Questions)
Q:
What if I get lost when I am making monitor adjustments?
A:
Simply press the OSD button, then select 'Reset' to recall all of the original factory
settings.
Q:
What is the Auto function?
A:
The AUTO adjustment key restores the optimal screen position, phase and clock settings
at the press of a single button – without the need to navigate through OSD menus and
control keys.
Q:
My Monitor has no power (Power LED does not light up). What should I do?
A:
Make sure the AC power cord is connected to the Monitor.
Q:
Will the LCD monitor accept an Interlace signal?
A:
No. If an Interlace signal is used, the screen displays both odd and even horizontal
scanning lines at the same time, thus distorting the picture.
Q:
What does the Refresh Rate mean for LCD?
A:
Unlike CRT display technology, in which the speed of the electron beam is swept from
the top to the bottom of the screen determines flicker, an active matrix display uses an
active element (TFT) to control each individual pixel and the refresh rate is therefore not
really applicable to LCD technology.
Q:
Will the LCD screen be resistant to scratches?
A:
A protective coating is applied to the surface of the LCD, which is durable to a certain
extent (approximately up to the hardness of a 2H pencil). In general, it is recommended that
the panel surface is not subject to any excessive shocks or scratches. An optional
protective cover with greater scratch resistance is also available.
Q:
How should I clean the LCD surface?
file:///D|/My%20documents/dfu/J/english/200p4/safety/saf_faq.htm (2 of 8)7/9/2004 12:36:39 PM